Double Glazing Seal Repairs
When double-glazed window seals are broken, it can lead to damp and mould. This can damage the frame and surrounding walls and can affect your health.
It is a more cost-effective way to repair most uPVC window frames than replacing them. A glazier will clean the frame and glass of the window, apply a new bead and smooth it.
Water Leaks
Window seals are made to keep water from your home. However, when they start to break down, it could result in water leaks around your windows. A window that is leaking is not just a nuisance, but it could cause significant damage to the structure of your home. It is essential to recognize the issue early and get it fixed by an expert before it gets worse.
The source of leaking windows can often be found not in the glass but on the frame or sill. This is the most common sign of a damaged seal. It could be caused by damage to the seal caused by weather or aging, worn out caulking or even a blocked drain resulting in an accumulation of water or ice.
Water appearing between the double-glazed panes is another common sign that the window seal has failed. Although, this isn't as dangerous as a leak because the water doesn't travel enough to enter your home. However, it does suggest that the inert gas that is sandwiched between the panes of glass has lost its lubrication, which will lower the insulation value of your windows.
The final common sign of a damaged window seal is condensation that forms between the panes. double glazing window repairs may be caused by an ineffective window seal or it could be the result of an unforgiving climate in your home or an issue with the glass. The condensation might not just be a nuisance, but it could cause the growth of mould and mildew in your home which is very difficult and expensive to eliminate.
If you are seeing these indicators, it's the time to have an inspection of your double glazed windows. The repair or replacement of windows will safeguard your home from water leaks, lower the cost of energy and reduce draughts. It's a small cost to pay to ensure the safety and comfort of your family. Contact Thompson Creek Window to discuss your options regarding window seal replacement or repair. Our staff is always ready to assist you! We serve homeowners in the Mid-Atlantic.
Condensation
A damaged seal on the double glazing could allow water to enter the gap between the insulating elements. This can lead to fogging or misting to the window panes.
If you notice condensation inside your home, it's time to contact a double glazing repair service. Condensation is a sign that the seal created at the factory has failed and water is leaking into the insulated gap.
Condensation can be caused by a variety of factors however, the most common cause is gaskets, sealants or insulation in the uPVC frames of the windows. As a result there are different double glazing seal repair options but it is vital that the new seal is correctly sized to ensure the perfect fit and water-tight seal.
Typically gaskets used to fill in the gaps between your double-glazed units are made of polyurethane foam. These are designed to last for a long time but they are susceptible to deterioration in time due to wear and tear as well as exposure to various temperatures and weather conditions throughout the year.
As time passes the foam may shrink or crack, which causes a break in the seal that allows moisture to creep into those areas of your double-glazed windows. This not only creates condensation, but it could also result in a loss of energy efficiency, which means that you're losing heat from your home to the outside air.
Re-sealing the windows is one way to fix this problem. This is not a guaranteed fix as it will only remove the existing condensation, and not address the underlying problems that are causing the double-glazed windows to leak or develop condensate.
A professional who can offer an insurance-backed guarantee must replace your windows in full. If the company fails, you're still covered by insurance. It is important to note that the warranty on your replacement windows must be a minimum of 10 years.
Misting
As autumn draws nearer it's a good idea to make sure that your double glazing seals are in good condition. Seals that have damaged can affect your windows' insulative properties and can also lead to condensation, mold and dampness. It is crucial to fix any problems with your double glazed windows as soon as possible to prevent further damage and save money on energy costs.
A standard double glazed window is made up of two panes of glass connected by an internal space that's filled with gas. A layer of sealant on the outside fills in the gap between the uPVC frame and the glass. This is vital to ensure the air-tight seal that keeps cool and warm air separate in your home and helps you save money on your heating bills. These seals can become damaged in time due to the weather, aging, or improper installation. When this happens the encapsulation formula that makes your double-glazed windows so effective could begin to lose its effectiveness.
If seals that are damaged or broken are not repaired they could cause condensation and dampness which can impact your health as well as the appearance of your window. The presence of mould and damp not only cause damage to your floors, walls and ceilings, but also cause allergens and irritants within your home, which can be harmful to you and your family's health.
One of the most frequent problems that can arise with your double glazing is that it can leak in between the panes. This occurs when moisture gets into the insulated part of your window. This is difficult to fix without professional double glazing seal repair.
There are DIY ways to deal with this issue, but we would advise against this because it's not only dangerous but also extremely hazardous and damage your windows. These methods involve drilling holes into your glass unit and then using chemicals to eliminate fog and condensation. This can lead to a number of complications and, in particular, expose your windows to water damage which could ruin the unit completely.
Professional glaziers have the skills and tools required to effectively reseal your uPVC frames and provide you with long-lasting results. Not to mention, they can also offer suggestions on the best way to keep your windows in good condition to avoid future issues.
Draughts
A draft coming from your window indicates that the sealant could have deteriorated. It is recommended to repair it or replaced. This will prevent cold air from entering your home. It will also improve the efficiency of your energy, reduce heating costs, and improve the comfort.
It is important to remember that some draughts aren't caused by the window seals but rather from the gap between the bricks' frames. In some cases, it can be possible to fix the issue by simply filling the gap with silicone caulking. If this does not work, it will require the seal to be professionally repaired.
When the sealant around double-glazed windows begins to fail and allows water to infiltrate. This can cause dampness or even mold. This can then cause a negative impact on health and may be damaging to property. It is essential to address any water ingress issues immediately you spot them. If your windows are still covered by a guarantee, it is worth checking with the company you bought them from, since they could cover the cost of the repairs.
It is worth checking if the windows are covered under warranties. Certain companies offer lifetime guarantees and others offer 10 years. If your double-glazed windows fall under warranty, you should contact the company that sold them as soon as you can and inform them about any issues you're having. It is recommended to contact the company in person, or by email and letter. This will ensure that everything is clearly documented and easily understood.
Also, it is important to note that draughts are usually caused by defective hinges, not an ineffective seal. The hinges are responsible for closing the window sash (the section that you open) but they can also become stiffer over time if they are not regularly oiled. This could cause a gap be created between the sash frame and the sash, which lets cold air to enter the house. Replacing the hinges can solve this issue without affecting window seals.